Fold over elastic shaped face mask

Here is a step by step photo guide for how to make this adjustable shaped face mask using fold over elastic.

Here is what you will need

33” fold over elastic
5” x 3/8” ribbon for loops
2 each front and lining fabrics
Matching thread and pins

First put right sides of self together and right sides of lining together. Sew along curve at 1/4”

From the right side of the front pieces fold the seam allowance to one side and stitch right beside the seam

Cut your 5” strip in half and fold each piece into a loop pinning the bottom piece 1/4” up from the bottom corner on the short side. Do this for both sides

Next put right sides of self and lining together and stitch at 1/4 “ starting from the top of one short side, across the bottom and back up the other short side.

Trim the corners to reduce bulk

Flip right sides out and press

Edge stitch along the 3 sides you already stitched

Now find the center of your fold over elastic and pin at the curved seam. Pin the elastic along the top edge and sew

Now cross the elastics over and thread them through the loops.

Now the recipient can tie the elastic off to suit their own head size and comfort. This style is easier on the ears than the elastic loop version since it doesn’t require them for support. My dad models below 😍